GE Reason H49 - Figure 28: Pluggable Terminal Block

Technical Manual
GE Reason H49
48
H49/EN M/C22
6.4.1.2 Crimped Ferrule
For safety reasons, wire terminations must be insulated using an insulated crimped
ferrule, suitable for 2,5mm
2
wire size.
Figure 28: Pluggable Terminal Block
Insulated wire ferrules must be slipped over the stripped cable and crimped to
prevent stranded wire from fraying.
Caution:
Refer to section 10.5.3 Auxiliary Fault Relays (Optical Port Alarm) page 128 for
electrical characteristics of alarm circuit.