GE Reason H49 - Figure 47: Reason H49 Web User Interface - SNMP Version Section

GE Reason H49
Technical Manual
H49/EN M/C22
71
The content of this page depends on the selected SNMP version.
Reason H49 supports three versions of SNMP:
• SNMPv1: SNMPv1 uses a community string for authentication. The SNMP agent
accesses all objects with read-only permissions using the community string public
and/or all objects with read/write permissions using the community string
private.
• SNMPv2c: SNMPv2c is a later version of the SNMP protocol. It supports the same
community-based security standard.
• SNMPv3: SNMPv3 is the most secure protocol. It supports the View-Based Access
Control Model and User-Based Security Model along with encryption and
Authentication features.
The following table summarizes the sections corresponding to each SNMP version.
V1 V2C V3
Communities Yes Yes No
Groups Yes Yes Yes
Users No No Yes
Views Yes Yes Yes
Access configurations Yes Yes Yes
Throughout the page:
• Click the + button to add a new element and set the related attributes as detailed
below,
• Click the remove button in front of the desired row, to delete an element from a
section.
SNMP Version selection
From the SNMP mode drop-down list, select the desired SNMP protocol version to be
used to manage the switch:
Figure 47: Reason H49 Web User Interface – SNMP Version Section