In any case, the Reason H49 switch cannot edit the passwords associated to LDAP-
managed accounts.
Note:
If the LDAP server is temporarily unreachable, you may experience access issues to user management features (User Account
creation...) from the H49. The operation can take time due to LDAP connection timeout.
7.4.3.4 Syslog Server
A Syslog server is used for logging any message of events that occur on the host.
The list of activities and operations, which are logged, is detailed below:
General Authentication Security System
Startup log
Login failed (Invalid user account,
wrong password, account Locked,
session already active,
Security settings updated System settings updated
Shutdown log
Login successful
User account changes (password
reset, change of role),
User account created, locked,
unlocked, removed
Time/date change
Logout (Timeout, User log off)
Role (assigned to and removed from
user account)
Firmware/application
update
Certificate management
Database switch
Central authentication server activity
(reachable or not)
System stopped/rebooted
Syslog server activity (reachable or
not)
This Syslog Server feature allows the user to configure a Syslog server.
Attributes in this page will be taken into account only if the Syslog server has been
selected in the Security > Security Settings page (see Security Settings section).
Attribute Description
Hostname Server’s IP address or Fully Qualified Domain Name
Port Communication port used by the Syslog server
Communication Protocol
Communication protocol used to send the logs to
the Syslog server
• UDP
• TCP
• TCP/TLS
Maximum Rate per Second
Maximum number of messages sent per minutes to
the Syslog server
To Next Page
Loading...
