GE Reason H49 - Figure 55: Reason H49 Web User Interface - Select a Firmware File; Figure 56: Reason H49 Web User Interface - Start the Upgrade Process; Figure 57: Reason H49 Web User Interface - Firmware Upload Confirmation

GE Reason H49
Technical Manual
H49/EN M/C22
77
To update firmware, go to the System > Management menu.
• Click the “…” button and then, select the correct .tar.gz file:
Figure 55: Reason H49 Web User Interface – Select a Firmware File
• Click the “Upgrade Firmware” button to activate the upgrade process:
Figure 56: Reason H49 Web User Interface – Start the Upgrade Process
The package signature is verified before allowing the firmware to be installed.
A popup prompts the user to decide whether he/she wants to keep the existing
switch configuration settings (user accounts, logs, date/time…).
• Check the box to save the existing switch configuration and click Confirm:
Figure 57: Reason H49 Web User Interface – Firmware Upload Confirmation
At the end of the upgrade process, the system will ask for a reboot.