GE Reason H49 - Figure 85: Reason H49 Web User Interface - Syslog Server Settings

Technical Manual
GE Reason H49
102
H49/EN M/C22
When UDP is used:
• If the log server is reachable, then the log messages are sent to the server “on-
the-fly”; in other words, messages are not buffered and sent in batch to the
server.
When TCP or TCP/TLS is used:
• If the log server is unavailable, the log messages are temporarily buffered and
they are sent to the server upon service reestablishment.
Figure 85: Reason H49 Web User Interface – Syslog Server Settings