GE Reason H49 - SNMP Traps

Technical Manual
GE Reason H49
34
H49/EN M/C22
4.8.2 SNMP Traps
The SNMP agent in the Reason H49 switch can send SNMP traps to the management
station. Traps are change-of-state messages alerting the SNMP manager to a
condition on the network. A trap message is sent to alert the management station to
some event or condition on the switch such as:
• Loss of communication on one port
• Loss of power supply input
• Loss of time synchronization (PTP)
• Resource exhaustion