Attribute Description
LDAP Server Enabled
Enables / disables the use of LDAP server
Local authentication uses the set of user and roles defined in
the User Accounts page while LDAP uses the configuration
defined in LDAP page
If LDAP server is enabled, then
• the LDAP server provides both authentication and roles
assigned to user accounts
• if the roles assigned to a user change, the user needs to
re-login to apply the new roles
Use Syslog Server
Reason H49 device keeps a local log file.
This option makes it possible to forward the local logs to the
configured Syslog server.
Server attributes are configured in Syslog page.
Certificate Management
Certificates are used in a network to provide secure access. This is an electronic
document that identifies an entity (machine, server or other) and associates that
entity with a key.
Reason H49 uses certificates for communicating with external servers such as the
syslog and LDAP server or upgrading HTTPS.
To upgrade certificates, perform the following steps:
• Click the “…” button to navigate to the folder that contains the desired certificate,
then select the relevant certificate and click Upload Certificate.
• Click Apply to save the modifications
Figure 80: Reason H49 Web User Interface – Certificate Management
Caution:
To manage system certificates from the Security Settings page, you must be a
Security Administrator.
Ensure that the certificate resides on the file system of the computer where your
browser is running.
To Next Page
Loading...
