GE Reason H49 - Login to the H49; Figure 90: SSH Console - Error During the Login Process; Figure 91: SSH Console - Enforced Password Policy

GE Reason H49
Technical Manual
H49/EN M/C22
135
12.1.3 Login to the H49
The console login screen appears. It prompts you for a login name and password.
Use the following default values:
• Login as: type user and press Enter
• Password: type user and press Enter
Note:
Login and password are case-sensitive. You can change the user name and the password later in the Command Line Interface.
If an error occurs during the authentication process, an information message appears
on screen, as shown in the following figure.
Figure 90: SSH Console – Error during the Login Process
When connecting to Reason H49 for the first time, the system prompts the user to
change the default password.
• Enter a new password and confirm:
Figure 91: SSH Console – Enforced Password Policy
Upon successful authentication, you are granted authorization for access.