Interfaces
This area displays the interface status:
Figure 38: H49 Web User Interface – Interfaces Status
Note:
The interface configuration is done in the System > Redundancy Mode page.
Each interface has a colored button and some details:
Attribute Description
Button color
Display the port type in accordance of colors.
• Red: Redundant interface Port A
• Green: Redundant interface Port B
• Blue: PRP coupling interface
• White: Standard interface
• Grey: The port is not available in the selected redundancy mode.
Media and speed state
of interfaces X1 to X6
• Copper 10/100/1000 Mbps
• Fiber 100 Mbps
• Fiber 1000 Mbps
Connection state of
interfaces X1 to X6
• Green: Connected
• Yellow: Disconnected
• Red: Disabled
These settings can be modified in the Network > Interface page.
To Next Page
Loading...
