GE Reason H49 - Figure 39: H49 Web User Interface - Statistics of a Connected Interface; Figure 40: Reason H49 Web User Interface - Time Synchronization Status

GE Reason H49
Technical Manual
H49/EN M/C22
61
Click a connected interface to get the status of the packets sent:
Figure 39: H49 Web User Interface – Statistics of a Connected Interface
Time Synchronization
This area displays read-only information about the device’s time synchronization
protocol.
Figure 40: Reason H49 Web User Interface – Time Synchronization Status
This information comes from the configuration done in the System > Global
Settings page.
The following attributes are also displayed according to the selected value.
Note:
when the device uses its Local clock as time source, then no other attribute is displayed in this section.