GE Reason H49 - Figure 76: Multicast Filtering Principles; Figure 77: Reason H49 Web User Interface - Multicast Filtering Configuration

GE Reason H49
Technical Manual
H49/EN M/C22
91
Multicast 2
Multicast 1
Multicast 2 Host Multicast 2 HostMulticast 1 Host Multicast 1 Host
S1620ENa
Figure 76: Multicast Filtering Principles
Reason H49 supports adding MAC addresses manually to restrict or filter multicast
traffic automatically.
The filter relies on a range of MAC addresses applied to one or more device ports
(interfaces).
To manage Multicast filtering rules, click Network > Multicast Filtering.
Figure 77: Reason H49 Web User Interface – Multicast Filtering Configuration
Add multicast MAC addresses manually:
Attribute Description
MAC Address Set the forbidden MAC addresses for the selected port(s)
Mask Length Number of bytes of the MAC Address to apply to the filter (1 to 6)
X1 to X6 Select the ports over which the frame is allowed.