• group
• includeAllDisks
• iquerySecName
• load
• monitor
• proc
• rocommunity
• rouser
• rwcommunity
• rwuser
• sysContact
• sysLocation
• sysName
• sysServices
• trap2sink
• trapsink
• view
Note:
Unsupported settings are passed directly to the SNMP configuration without further checking. In the same manner, unsupported
settings cannot be modified by using the set command; they shall be deleted prior to being re-set.
The list of currently supported settings may evolve over time. Use the snmp -i command to see which settings are currently
supported. For further detail, please refer to http://www.net-snmp.org/docs/man/snmpd.conf.html.
To Next Page
Loading...
