GE Reason H49 - Page 148

Technical Manual
GE Reason H49
148
H49/EN M/C22
Banner Text
The following values can be set to configure the login banner text to be displayed at
user log on:
command parameter Description Values
bannertext
-a
IP address of the remote FTP/SFTP server
-D
Enables the debug mode
-f
Path / Filename to be used
-l
Updates the banner text using a local file /path/filename
-n
User name for the remote FTP/SFTP server
-m
Updates the banner text with a message “text”
-p
Protocol to be used for the remote FTP/SFTP server
-r
Sets the banner text with a remote file.
-s
Enables/disables the banner enable, disable
Communication Protocol
The following values can be set in the Communication Protocol configuration:
command parameter Description Values
Communicationprotocol
-f
Sets the port for the FTP protocol
-u
Defines the insecure protocols (Telnet, ftp)
-S
Defines the secure protocols (SSH, SFTP)
-p
Sets the port for secure protocols
-s
Enables or disables the secure or insecure protocol
-t
Sets the port for the Telnet protocol