GE Reason H49 - Page 65

GE Reason H49
Technical Manual
H49/EN M/C22
65
Network
The Network area allows the user to modify the usual TCP/IP network parameters.
An explanation of each configuration item is given in the following table:
Attribute Description Factory Default
Name Name of the system Undefined
VLAN ID
Default VLAN ID. It identifies the individual
VLANs you create on your network.
IP Address
IP address in IPV4 format which identifies the
switch on a TCP/IP network.
192.168.254.254
Subnet Mask
Identifies the type of network to which the
H49 is connected.
255.255.0.0
(Class B network)
Gateway
IP address of the router that connects the
LAN to an outside network.
0.0.0.0
DNS
IP address of the DNS Server used by your
network.
10.5.6.78
Time
The Time area allows the user to set the time, date and other time source attributes
for the system and the PTP settings:
Attribute Description
Timezone
Allows conversion from GMT (Greenwich Mean Time) to local time.
Use the drop-down list to select the time zone of the system.
Note:
Changing the time zone will automatically correct the current time. You should configure the time zone before
setting the time.
Synchronization
The H49 time synchronization mode can be:
• Manual (the device uses its Local clock as time source)
• NTP
• PTP