GE Series 90-30 PLC

5-30 Series 90-30 PLC Installation and Hardware Manual – August 2002 GFK-0356Q
5
CPU323
Catalog Number IC693CPU323
CPU Type 10-slot baseplate with embedded CPU
Total Baseplates per System 1
Load Required from Power Supply 430 milliamps from +5 VDC supply
Processor Speed 10 MegaHertz
Processor Type 80188
Operating Temperature 0 to 60 degrees C (32 to 140 degrees F) ambient
Typical Scan Rate 0.6 milliseconds per 1K of logic (boolean contacts)
User Program Memory (maximum) 12K Bytes (6K bytes prior to release 7)
Discrete Input Points - %I 320 (maximum - combined inputs + outputs)
Discrete Output Points - %Q 320 (maximum - combined outputs + inputs)
Discrete Global Memory - %G 1280 bits
Internal Coils - %M 1024 bits
Output (Temporary) Coils - %T 256 bits
System Status References - %S 128 bits (%S, %SA, %SB, %SC - 32 bits each)
Register Memory - %R 1024 words
Analog Inputs - %AI 64 words
Analog Outputs - %AQ 32 words
System Registers (
for reference table viewing
only; cannot be referenced in user logic
program)
16 words (%SR)
Timers/Counters 340
Shift Registers yes
Built-in Ports 1 (uses connector on PLC power supply). Supports SNP slave
and SNP-X slave protocols.
Communications
LAN
- Supports multidrop. Also supports Ethernet, FIP,
Profibus, GBC, GCM, GCM+ option modules.
Override no
Battery Backed Clock no
Interrupts no
Type of Memory Storage RAM and optional EPROM or EEPROM
PCM/CCM Compatibility no