Cables
GFK-0356Q Chapter 10 Cables 10-49
10
IC693CBL315
I/O Interface Cable (24-Pin) for 32 Point Modules
Note: This cable became obsolete in late 1998. It was replaced by two cables:
IC693CBL327 and IC693CBL328. See the data sheet for these cables
for details. The replacement cables have right-angle connectors to
reduce the clearance space required in front of the PLC.
Function of cable
This prewired cable is available for use with all Series 90-30 high-density (32 point) I/O modules
that use the Fujitsu 24-pin user I/O connector. Each of these modules has two of these connectors
mounted side-by-side. I/O Interface cables have a 24-pin connector on one end for connection to
the module, and stripped and tinned wires on the other end. Catalog numbers for 32 point modules
having two 24-pin connectors are: IC693MDL654, IC693MDL655, IC693MDL752, and
IC693MDL753.
Connections to input circuits are made from the user’s input devices to two male (pin-type) 24-pin
connectors (Fujitsu FCN-365P024-AU) mounted on the front of the module. The connector
mounted on the right of the module (front view) interfaces with groups A and B; the connector on
the left side of the module interfaces with groups C and D. If a different length cable is required
for connections to these modules, you can build your own cable.
1B1
12B12
Length = 10’ (3 meters)
Connector:
Fujitsu FCN–365S024–AU
Figure 10-31. IC693CBL315 Cable
Building Custom Length Cables for 24-Pin Connectors
Cables connecting the module to field devices can be built to length as required for individual
applications. You must purchase the mating female (socket type) 24-pin connectors. The 24-pin
connector kit can be ordered as an accessory kit from GE Fanuc. Catalog numbers for these
connectors and their associated parts are listed in the following table. The list includes catalog
numbers for three types of connectors: solder pin, crimp pin, and ribbon cable. Each accessory kit
contains enough components (D-connectors, backshells, contact pins, etc.) to assemble ten single-
ended cables of the type specified for each kit.
To Next Page
Loading...
