GE Series 90-30 PLC

7-12 Series 90-30 PLC Installation and Hardware Manual – August 2002 GFK-0356Q
7
IC693DVM300 Digital Valve Driver Module
This 4-channel digital valve driver module is capable of driving loads of up to 1.6 Amps at 24
VDC. Although it mounts in a standard Series 90-30 PLC slot, it does not connect to the PLC
backplane. Its control power and output power come from an external supply. (The GE Fanuc
IC690PWR124 stand-alone power supply would be a suitable choice.) This module is designed for
TTL (5 VDC) inputs.
OUTPUT
1
2
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
4
DIG CH: 1
2
3
4
PWR
28V 1.6A max.
+28V.IN
+28V.RET
AUX.OUT.+15
AUX.OUT.-15
DIGITAL.1.IN
DIGITAL.2.IN
DIGITAL.3.IN
DIGITAL.4.IN
DIGITAL.RET
+28V1.IN
+28V2.IN
28V1&2.RET
VALVE.1.OUT
VALVE.2.OUT
VALVE.3.OUT
VALVE.4.OUT
VALVE.1.RET
VALVE.2.RET
VALVE.3.RET
VALVE.4.RET
Figure 7-6. IC693DVM300 Digital Valve Driver Module
Indicator LEDs
■ DIG CH: 1 – 4: These light when their corresponding input is at a Logic 1 level.
■ PWR: Lights to indicate the presence of +26 VDC (nominal) input power on terminals 1
and 2.