GE Series 90-30 PLC

10-40 Series 90-30 PLC Installation and Hardware Manual – August 2002 GFK-0356Q
10
IC693CBL308/309
I/O Cables (50-Pin) for 32 Point Modules
Function of cable
This cable is used with 32 point High Density modules that have a 50-pin Honda connector
mounted on the front of the module. The modules that use these cable are: IC693MDL652,
IC693MDL653, IC693MDL750, and IC693MDL751.
The I/O cables have a female connector on one end, and stripped and tinned wires on the other end.
Each of the stripped and tinned wires has a label attached to it for ease of identification. The
numbers on these labels correspond with the pin number of the connector wired to the opposite
end.
Specifications
Cable Length
IC693CBL308
IC693CBL309
3 feet (1 meter)
6 feet (2 meters)
Connectors 50-pin female Honda on end that connects to male connector on module.
Opposite end has stripped and tinned labeled wires for connection to
Connector Interface Assembly
Wiring Information
Table 10-3. Wire List for 32 Point I/O Cables
Connector
Pin
Number
Color Code
Label
Number
Loose End
Connector
Pin
Number
Color Code
Label
Number
Loose End
1 Black 1 26 White/Black/Violet 26
2 Brown 2 27 White/Black/Gray 27
3 Red 3 28 White/Brown/Red 28
4 Orange 4 29 White/Brown/Orange 29
5 Yellow 5 30 White/Brown/Yellow 30
6 Green 6 31 White/Brown/Green 31
7 Blue 7 32 White/Brown/Blue 32
8 Violet 8 33 White/Brown/Violet 33
9 Gray 9 34 White/Brown/Gray 34
10 White 10 35 White/Red/Orange 35
11 White/Black 11 36 White/Red/Yellow 36
12 White/Brown 12 37 White/Red/Green 37
13 White/Red 13 38 White/Red/Blue 38
14 White/Orange 14 39 White/Red/Violet 39
15 White/Yellow 15 40 White/Red/Gray 40
16 White/Green 16 41 White/Orange/Yellow 41