TBQC Components
GFK-0356Q Appendix H Terminal Block Quick Connect Components H-13
H
Cable Data
Data sheets for these cables are found in the “Cables” chapter of this manual.
Terminal Block Data
IC693ACC337 TBQC Terminal Block
Use with the following 32-point I/O modules (2 required per module):
IC693MDL654, IC693MDL655
IC693MDL752, IC693MDL753
1
2
C
2 4 6 8 10 12 14 16 18 20
135 7 9 11 13 15 17 19
CCCCCCCCCCCCCCCC
TE RM INAL
BLOCK
(See Note 1
Below)
Maximum wire size
per terminal: one
#14 AWG (2.10 mm
2)
Width
Height (all blocks) 2.15” (57mm)
Depth (all blocks) 1.7716” (45mm)
4.45” (112mm)
22
21 23
24
24–Pin
Connector
B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12
24
23
Figure H-9. IC693ACC337 TBQC Terminal Block
Note
The common row terminals (labeled with the letter C) are provided for wiring
convenience. Their use is optional. They are electrically isolated from the numbered
terminals. You may use them as is, or jumper them to a numbered terminal. Refer to
GFK-0898,
Series 90-30 PLC I/O Module Specifications Manual
for wiring diagrams of
the modules.
Mounting
These terminal blocks are mounted on a standard, user-supplied 35 mm DIN-rail.
To Next Page
Loading...
