GE Series 90-30 PLC

4-4 Series 90-30 PLC Installation and Hardware Manual – August 2002 GFK-0356Q
4
IC693PWR330 High Capacity Power Supply, 120/240 VAC/125 VDC Input
The IC693PWR330 High Capacity Power Supply is rated for 30 watts output.
For applications
requiring greater +5V current capacity than is available with the standard supply
(IC693PWR321), this supply allows all 30 watts to be consumed from the +5V supply.
It can
operate from an input voltage source in the range of 85 to 264 VAC or 100 to 300 VDC. This
power supply provides the following outputs:
■ +5 VDC output.
■ +24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay
modules.
■ Isolated +24 VDC, which is used internally by some modules, can also be used to provide
external power for 24 VDC Input modules.
The load capacity for each output of this power supply is shown in the following table.
Table 4-4. IC693PWR330 Power Supply Capacities
Catalog
Number
Load
Capacity
Nominal
Input Output Capacities (Voltage/Power *)
IC693PWR330 30 Watts 100 to 240 VAC or
125 VDC
+5 VDC
30 watts
+24 VDC Isolated
20 watts
+24 VDC Relay
15 watts
*
Total of all outputs combined cannot exceed 30 watts.
100-240 VAC
PROGRAMMABL
E
CONTROLLER
SYSTEM
STATUS
INDICATORS
+
PWR
OK
RUN
BATT
B
A
T
T
E
R
Y
LITHIUM
BACK-UP
BATTERY
BATTERY
CONNECTORS
RS-485
COMPATIBLE
SERIAL PORT
CONNECTIONS FOR
AC/DC POWER SOURCE
INTERNAL POWER SOURCE FOR
MODULES REQUIRING 24VDC
IC693PWR330
GE Fanuc
Series 90-30
POWER SUPPLY
50/60 HZ 100VA
125VDC, 50W
INPUT
24 VDC
OUTPUT
0.8A MAX.
HIGH CAPACITY
Figure 4-2. High Capacity AC/DC Input Power Supply - IC693PWR330