G-8 Series 90-30 PLC Installation and Hardware Manual – August 2002 GFK-0356Q
G
Publication Revision Letters
When a GE Fanuc publication is revised, a letter is placed at the end of the publication number. For
example, in the publication number GFK-0356Q, the letter Q at the end indicates the version of the
manual. Manuals are revised when there are changes or additions to the products or product lines
covered in the manual. Since this is a continual process revision letters are not included in this
appendix, except in a few special cases. Therefore, when ordering these publications, ask for the latest
version.
Note: If a publication number does not have an ending letter (suffix), such as GFK-1581, the
publication has never been revised.
Other Sources of Information
■ GE Fanuc InfoLink PLC CD. This CD contains a collection of GE Fanuc PLC manuals for
Series 90-30, Series 90-70, Genius, VersaMax, etc.
■ GE Fanuc web site. This web site, at http://www.gefanuc.com, contains recently revised
publications, product revision histories, and an online catalog.
Note: The information in this appendix is based on Data Sheet GFK-1661.
To Next Page
Loading...
