General information GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650
Assembly and Operating Manual
12 / 96 BL061 GB Edition 04/2016
1.7 Intended use
The temporarily erected suspended working platforms AB 450 / 650 are
utilised as aluminium platforms with rope winches GEDA AB 450 / 650
attached to the sides or C-clamps with safety rope and rope stop on
construction sites according to EN1808.
Permitted construction alternatives
x Straight construction of the BMU platform with 1 winch up to a
maximum of 2 m.
x Straight construction of the BMU platform with 2 winches up to a
maximum of 14 m.
x Corner construction of the BMU platform with 3 winches.
x Circular construction of the BMU platform with 3 winches.
Observe and comply with the instructions in Chapter 3 “Technical Data”.
Any other use or any use going beyond this is not considered proper
use.
The operating company/user of the machine is solely liable for any
damage resulting from such action. This applies equally to any arbitrary
changes to the machine.
Intended use includes
compliance with the assembly, operation and maintenance
provisions (Assembly and Operating Manual) provided by the
manufacturer.
consideration of foreseeable misconduct of other persons.
observation of the corresponding national regulations.
To Next Page
Loading...
