GEDA AB 650 - Emergency Lowering Procedures

Malfunctions – Diagnosis – Repair GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650
Assembly and Operating Manual
82 / 96 BL061 GB Edition 04/2016
9.3.2 Rescue procedures
Emergency lowering
The emergency lowering allows controlled lowering of the working
platform in the events of a fault or in the event of a power failure.
¾ Pull slightly on the brake lever (1) on the
motor of the winch(es).
¾ Working platform slides down.
NOTE
If the working platform does not weigh very much, it may be necessary
to initiate / support the downwards motion by additionally pulling the
hand wheel.
¾
Open the cover (2).
¾ Turn the hand wheel (3) until the working
platform glides downwards on its own.
¾ Close the cover (2).
) When the cover (2) is open, travelling via the central control box is
no longer possible.
2
1
3
2
3
1