Malfunctions – Diagnosis – Repair GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650
Assembly and Operating Manual
84 / 96 BL061 GB Edition 04/2016
9.4 Repair
Repair work may only be carried out by trained and competent
persons because it requires special expert knowledge and skills.
Neither is communicated in this Operating Manual.
Electric shock
Parts are also electrically life after pressing the EMERGENCY STOP.
Applies to all work on electrical parts.
- Disconnect the mains plug.
Due to the machine being switched on during
maintenance/repair work or when there is a defect.
Secure the mains plug against being plugged in.
When ordering spare parts, please provide the following:
Type
Year of construction
Works no.
Operating voltage
Quantity required
The name plate is located on the trolley of the base unit.
1 Spare parts must conform to the manufacturer’s technical
specifications! Only use original spare parts from GEDA.
For service or repair work, please contact our customer service
department:
For the sales and customer service address, refer to Chapter 1.4
To Next Page
Loading...
