GEDA AB 650 - Abbreviations; Information about the Machine

GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650 General information
BL061 GB Edition 04/2016
9 / 96 Assembly and operating manual
1.2 Abbreviations
The following abbreviations may be used in the manual.
max. maximum
min. minimum
mins minutes
etc. et cetera
poss. possible/possibly
e.g. for example
ml millilitres
mm millimetres
°C degrees Celsius
°F degrees Fahrenheit
ft. feet
ft/m feet per minute
m/min metres per minute
in inch
etc. et cetera
lb. pounds
lbf.-ft pounds per feet
kg kilogram
l litre
gal. gallons
kip. kilopound
Nm Newton metre
km/h kilometres per hour
mph miles per hour
incl. including
if nec. if necessary
i.e. id est (that is)
reg. regarding
RH relative humidity
approx. approximately
Ø diameter
® registered trademark
© copyright
TM trademark (trade name)
% per cent
‰ per thousand
dB (A) sound pressure level
LWA sound power level
> greater than
< less than
± plus or minus
1.3 Information about the machine
Machine model
GEDA
®
SUSPENDED WORKING
PLATFORM AB 450 / 650
Year of construction: Refer to name plate
Documentation version: 04/2016