Malfunctions – Diagnosis – Repair GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650
Assembly and Operating Manual
80 / 96 BL061 GB Edition 04/2016
9.2.4 Inspection of the working platform after mounting the drive
rope
)
If the rope stop has been triggered after a rope break, the safety
rope must be checked for damage!
x Dynamic test of the suspended working platform with rated load.
Distribute the load evenly over the platform surface.
Move the platform at rated speed up and down, where traversing of
at least 1 m is required.
The test is considered passed if it does not cause any failure or visible
damage of the structure.
To Next Page
Loading...
