GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650 Technical data
BL061 GB Edition 04/2016
21 / 96 Assembly and operating manual
3 Technical data
3.1 Operating and environmental conditions
The machine may only be operated when the following operating
and environmental conditions are adhered to:
Temperature range: minimum - 20 °C [- -4 °F]
maximum +40°C [104°F]
Air humidity (relative): 80 % RH.
x Storage in dry rooms, in order to prevent corrosion.
x No jolts or vibrations.
x No abrasive, corrosive substances.
x The machine must be protected against pest damage (insects,
rodents, etc.).
x Before transportation/storage, the machine must be cleaned and
checked for signs of damage.
Weather conditions:
No storms with risk of lightning.
It may be necessary to cease/prohibit operation of the machine under
extreme weather conditions, even if the operating and environmental
conditions are within the conditions stated. For example, by the
combined occurrence of heavy frost and storm. Here, the operating
company must provide appropriate regulations.
Atmosphere:
No concentration of aggressive / corrosive substances, as well as
(potentially explosive (fine particulate matter) must occur. If this cannot
be safely excluded, then the corrosion protection and/or the functional
reliability of the electrical components must be checked at regular
intervals and they should, if necessary, be replaced. Fine particulate
matter must be removed.
Location of storage:
In order to prevent corrosion, if possible the machine should be stored
in dry air.
To Next Page
Loading...
