GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650 General safety information
BL061 GB Edition 04/2016
15 / 96 Assembly and operating manual
2.2 Safety instructions for operating personnel
The operating manuals (working platform and rope winch) must be
within reach at all times at the location where the machine is used.
The machine may only be used in a technically fault-free condition, as
well as in accordance with the intended use, in a safety conscious
manner aware of the hazards, and while observing the Operating
Manual! In particular, faults that could impair safety must be eliminated
immediately!
In addition to this, the machine may only be operated when all safety
devices are present and functioning!
Check the machine at least once each working day for externally
identifiable damage and defects! Immediately report any changes
(including changes to the operating behaviour) to the office/person in
charge. If necessary, shut down and secure the machine immediately!
The responsibilities for different jobs within the context of operation,
servicing and maintenance of the machine must be clearly stipulated
and adhered to. This is the only way to avoid mistakes especially in
hazardous situations.
The pertinent rules for prevention of accidents as well as the other,
generally recognised, safety-related and industrial-health-related rules
must be adhered to.
Switch-on and shut-down procedures, including emergency shut-
down, must be observed in accordance with the Operating Manual for
all work that affects operation, and for conversions and adjustments to
the machine and its safety devices.
To Next Page
Loading...
