GEDA AB 650 - Page 42

Assembly GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650
Assembly and Operating Manual
42 / 96 BL061 GB Edition 04/2016
¾ Add ballast weights to
counterweight carrier (5).
(Refer to Chapter 5.1.4)
DANGER
Danger to life
The counterweights must be secured with a lock against unauthorized
removal!
¾ Carefully lower the ropes to the ground.
CAUTION
R opes mus t be s us pended vertically
When aligning the outrigger, it must be ensured that the ropes are
suspended vertically between the platform and the outrigger in the
finished, installed state. If this is not the case, correct the position of the
outrigger accordingly following assembly of the platform and the rope.
The excess length on the ground must be laid again in an untwisted
state!