GEDA
®
SUSPENDED WORKING PLATFORM AB 450 / 650 Operation
BL061 GB Edition 04/2016
63 / 96 Assembly and operating manual
Carry out a test run with an empty suspended working platform and
check to ensure that
x the entire travel path of the working platform is free.
x the wire rope does not show signs of damage and wear.
¾ Check the mains supply cable and control lines for signs of damage
The working platform must stop immediately when
the EMERGENCY STOP button is pushed.
the limit switch approach plate was touched.
The working platform must not start to travel if
x the EMERGENCY STOP button is pressed.
To Next Page
Loading...
