GEM GPS3600 User Manual

○○○○○○○○○○○○○○○○○○○○○○
2•10 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
2•10 Reference Guide
THE SOUND PATCH OPTIONS
CATCH NOTE... (F1)
Selects the note to place in edit by playing it on
the keyboard.
1. Press F1 («Catch note...»).
The following message appears.
2. Play the note to place in edit.
The dialog window closes and the «Edit note»
parameter is modified.
COPY TO LAYER... (F2)
Copies an entire Layer to the other.
1. Select the Layer to copy with the soft but-
tons A and B.
2. Press F2 («Copy to Layer...»). You are
prompted to reconfirm the operation.
3. Press ENTER to confirm or ESCAPE to cancel.
WARNING - The copy will cancel the programmed
data in the destination Layer.
EXPAND... (F3)
Extends the programmed parameters of the note
in edit to a specified keyboard zone.
1. Select the note whose parameters require
copying.
2. Press F3 («Expand...»).
The «Expand» dialog window opens:
3. With the «From» parameter selected, rotate
the DIAL, or play a note to specify the low-
est note of the required keyboard zone.
4. Pass to the «To» parameter with the cursor
button
. Rotate the DIAL, or play a note to
specify the highest note of the required key-
board zone.
5. Press ENTER to confirm the Expand com-
mand, or ESCAPE to cancel.
Confirming extends the programmed param-
eters of the original note to the specified key-
board zone.
THE SOUND PATCH OPTIONS
CATCH NOTE... (F1)
Selects the note to place in edit by playing it on
the keyboard.
1. Press F1 («Catch note...»).
The following message appears.
2. Play the note to place in edit.
The dialog window closes and the «Edit note»
parameter is modified.
COPY TO LAYER... (F2)
Copies an entire Layer to the other.
1. Select the Layer to copy with the soft but-
tons A and B.
2. Press F2 («Copy to Layer...»). You are
prompted to reconfirm the operation.
3. Press ENTER to confirm or ESCAPE to cancel.
WARNING - The copy will cancel the programmed
data in the destination Layer.
EXPAND... (F3)
Extends the programmed parameters of the note
in edit to a specified keyboard zone.
1. Select the note whose parameters require
copying.
2. Press F3 («Expand...»).
The «Expand» dialog window opens:
3. With the «From» parameter selected, rotate
the DIAL, or play a note to specify the low-
est note of the required keyboard zone.
4. Pass to the «To» parameter with the cursor
button
. Rotate the DIAL, or play a note to
specify the highest note of the required key-
board zone.
5. Press ENTER to confirm the Expand com-
mand, or ESCAPE to cancel.
Confirming extends the programmed param-
eters of the original note to the specified key-
board zone.
○○○○○○○○○○○○○○○○○○○○○○
2•10 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
2•10 Reference Guide
THE SOUND PATCH OPTIONS
CATCH NOTE... (F1)
Selects the note to place in edit by playing it on
the keyboard.
1. Press F1 («Catch note...»).
The following message appears.
2. Play the note to place in edit.
The dialog window closes and the «Edit note»
parameter is modified.
COPY TO LAYER... (F2)
Copies an entire Layer to the other.
1. Select the Layer to copy with the soft but-
tons A and B.
2. Press F2 («Copy to Layer...»). You are
prompted to reconfirm the operation.
3. Press ENTER to confirm or ESCAPE to cancel.
WARNING - The copy will cancel the programmed
data in the destination Layer.
EXPAND... (F3)
Extends the programmed parameters of the note
in edit to a specified keyboard zone.
1. Select the note whose parameters require
copying.
2. Press F3 («Expand...»).
The «Expand» dialog window opens:
3. With the «From» parameter selected, rotate
the DIAL, or play a note to specify the low-
est note of the required keyboard zone.
4. Pass to the «To» parameter with the cursor
button
. Rotate the DIAL, or play a note to
specify the highest note of the required key-
board zone.
5. Press ENTER to confirm the Expand com-
mand, or ESCAPE to cancel.
Confirming extends the programmed param-
eters of the original note to the specified key-
board zone.
THE SOUND PATCH OPTIONS
CATCH NOTE... (F1)
Selects the note to place in edit by playing it on
the keyboard.
1. Press F1 («Catch note...»).
The following message appears.
2. Play the note to place in edit.
The dialog window closes and the «Edit note»
parameter is modified.
COPY TO LAYER... (F2)
Copies an entire Layer to the other.
1. Select the Layer to copy with the soft but-
tons A and B.
2. Press F2 («Copy to Layer...»). You are
prompted to reconfirm the operation.
3. Press ENTER to confirm or ESCAPE to cancel.
WARNING - The copy will cancel the programmed
data in the destination Layer.
EXPAND... (F3)
Extends the programmed parameters of the note
in edit to a specified keyboard zone.
1. Select the note whose parameters require
copying.
2. Press F3 («Expand...»).
The «Expand» dialog window opens:
3. With the «From» parameter selected, rotate
the DIAL, or play a note to specify the low-
est note of the required keyboard zone.
4. Pass to the «To» parameter with the cursor
button
. Rotate the DIAL, or play a note to
specify the highest note of the required key-
board zone.
5. Press ENTER to confirm the Expand com-
mand, or ESCAPE to cancel.
Confirming extends the programmed param-
eters of the original note to the specified key-
board zone.

GEM GPS3600 Specifications

General

Brand	GEM
Model	GPS3600
Category	Musical Instrument
Language	English