Reference Manual Preliminary
Prox–DU & Prox–SU
www.gemalto.com Release for first samples Do not use for final design
DOC118569A Public Use Page 42/134
The two first names belong to the first Prox–DU device. The two next names belong to the
second Prox–DU device.
Note: The application should use the name of the device for connecting the appropriate
smart card interface.
PC/SC limitations
The Prox–DU and the Prox–SU devices have the following limitations:
• The contactless interface will only support the T=1 protocol.
Consequently any connection requiring the T=0 protocol will not be accepted by the
contactless interface.
• Multi-activation of contactless smart cards is not supported.
Consequently the first smart card detected in front of the reader/writer will be
activated. The remaining smart cards will be ignored.
• The communication with the contactless interface and the contact interface shall be
exclusive.
Consequently the application shall not use the two interfaces simultaneously. Else
communication errors can occur.
To Next Page
Loading...
Need help?
General
