38
Fryer Operation
GBF-50 Fryer
4.01.5.1 Editing a Menu Item Preset - continued
To minimize potential for flavor transfer, establishments cooking seafoods may wish to force operators to filter oil
after only one (1) batch of an item is cooked. When FISH FILTER is set to [ON], the unit will enter FILTER MODE
after completing (1) load of the menu item. If the setting FORCE FILTER SNOOZE is set [ON] in User Settings
(Section 4.01.8), two (2) batches may be cooked before filtering is forced, or prompt is displayed.
When FISH FILTER is set [ON], it is in effect regardless of whether FORCE FILTER setting is ON or OFF ... if [OFF],
only a prompt message will be displayed; if [ON], the fryer will be locked out of continuing operation until a filter
cycle is completed.
To edit FISH FILTER
setting, scroll to and select as described previously ... [—>] pointing to [FISH FLTR]
Press the [START] key to toggle between [ON]
& [OFF] stop on desired setting.
Edit FISH FILTER Setting:
To Next Page
Loading...
