golmar NEXA Series User Manual

PROGRAMMING THE DOOR PANEL
117
Viewer module programming entry and exit:
To enter programming mode, press the key button three times and then enter secret administrator pin “271800”.
Key button + key button + key button + administrator pin.
To exit programming mode, press the C button (cancel) once if it is in a programming field or twice if not.
If, after 15 minutes, no key has been pressed, it exits programming mode.
Important:
Bear in mind the number of digits in the configured code (factory setting 2718 = 4).
*
( )
*
( )
*
( )
2 7 1 8
To configure system settings, go to the programming menu. The menus marked with an must be configured forasterisk
the system to function properly. There are two programming menus: , which allows all system settings toadministrator
be modified, and , which only allows changes to settings that do not affect system operation. Programming settingsuser
with black text on a white background are available in both programming menus; settings with white text on a black
background are only available in the administrator menu.
Completion of residents list entries is not necessary for door panel operation, as long as the 2nd call table option is
deactivated.
To scroll through the options of the various menus, use the arrows. In any of these menus, option changes are saved
every time the button is pressed, regardless of whether the button is then pressed. Use the button to exit the
programming menu and save the changes.
Configuration menu (Plus, Vista PLus and Gtwin system)
10:10
To enter configuration mode, press the key button
three times and then enter the secret administrator
pin (factory code 2718) or user pin (factory code
4444)
CONFIGURATION
2 7 1 8 4 4 4 4
or
****
SYSTEM CONFIG
ACCESS CONTROL
RESIDENT LIST
SYSTEM CONFIG
ACCESS CONTROL
RESIDENT LIST
SYSTEM CONFIG
ACCESS CONTROL
RESIDENT LIST
Enables the system's configuration settings to be
changed. To access the configuration menu, press .
Page 1 .18
Allows the access control settings to be configured. To
access the access control menu, press . Page 1 .25
Allows the resident list settings to be configured. To
access the resident list menu, press . Page 1 .30
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL WITH DISPLAY

golmar NEXA Series Specifications

General

Brand	golmar
Model	NEXA Series
Category	Intercom System
Language	English