golmar NEXA Series User Manual

PROGRAMMING THE DOOR PANEL
119
1 0 50 1 8
PANEL W.CAMERA
CALL TO EXCHANGE
IF NO ANSWER
AUTO SWITCH-ON
CALL TO EXCHANGE
IF NO ANSWER
AUTO SWITCH-ON
2 RESIDENT LIST
IF NO ANSWER
AUTO SWITCH-ON
2 RESIDENT LIST
SET TIME
ENTER VALUE
:000000
CALL TO EXCHANGE
IF NO ANSWER
PANEL ADDRESS
PANEL W.CAMERA
CALL TO EXCHANGE
018105
PANEL ADDRESS
PANEL W.CAMERA
Makes it possible for audio and/or video communication without having
been called from the door panel if this function has been enabled.
In buildings with several door panels, only activate on one of them; in
systems with a general entrance door panel, it can only be activated on the
door panels of the inner buildings. To change, press
.
(Gtwin ).system without function
Makes it possible to assign a call code that is di ferent from the actualf
address of the monitor; this code is defined in RESIDENT LIST: CALL
CODE (see p. 1 ) To change, press30
. .
The system has an internal clock that displays the time on the keypad
screen when the device is in standby. It can also be used to determine
whether or not access can be granted by means of a user code set in the
REPERTORY: ACCESS CODE (see p. 1 ).31
An internal battery keeps the system's clock running even when the device
has been switched of for an extended period of time. The battery can bef
disabled from this configuration menu in the following option.
7 0 51
ENTER VALUE
00:00
IF NO ANSWER
AUTO SWITCH-ON
2 RESIDENT LIST
SET TIME
IF NO ANSWER
AUTO SWITCH-ON
2 RESIDENT LIST
17:05
SET TIME
CLOCK BATTERY
AUTO SWITCH-ON
2 RESIDENT LIST
Enables the internal battery to be activated for the door panel to keep time. If
the option is activated, the system will keep time even when the device
has been switched o f for an extended period of time.f
To change, press
.
CLOCK BATTERY
DISPLAY CLOCK
2 RESIDENT LIST
SET TIME
Determines whether the keypad screen displays the clock during standby
mode.
To change, press
.
*
*
Continued overleaf
System settings menu
Continued from previous page
To change the value, press , enter the and thenmonitor/telephone code
press the button to save the changes.
Press the button to restore the previous value.
(Gtwin ).system without function
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL WITH DISPLAY

golmar NEXA Series Specifications

General

Brand	golmar
Model	NEXA Series
Category	Intercom System
Language	English