PNP
The GXV3240 has built in PNP (Plug and Play) application to mass provision for other Grandstream
phone clients. The PNP feature is for other phones to be able to find the configuration path and download
their configuration settings with little or no configurations from GXV3240. It gives the GXV3240 phone
accessibility to many phones’ settings and features that can be configured, making it unnecessary to
configure these settings on other phones themselves.
SET UP PNP APPLICATION
It needs to configure the Account 1’s setting properly before implementing the PNP feature on GXV3240.
1. Check the Account Active box for Account 1.
2. In Account 1’s SIP setting page, cancel the Validate Incoming SIP Messages feature.
3. In Account 1’s SIP setting page, set the SIP transport protocol to UDP.
4. In the Account 1’s SIP setting page, do not use 5060 as the Local SIP Port. This setting will be
overridden to 0 automatically when the PNP feature is enabled. The port number with 0 refers the port
number will be random.
ENABLE PNP FEATURE
After the settings above, end users can enable the PNP feature for GXV3240. It can be enabled from the
web page or from the LCD screen.
ENABLE FROM WEB PAGE
1. Log in the GXV3240 web page, browse to Maintenanceïƒ Upgrade.
2. Check the Enable PNP Feature box.
3. In the PNP URL box, type the URL path for the saved configuration file with protocol identifier. For
example, http://192.168.1.200/config. The protocol identifier can be selected from tftp, http, and https.
4. GXV3240 supports the built-in httpd server feature. End users can save the config file in the
GXV3240 device and it can be set as a file server transport the files to other phone client. If end user
needs this feature, the config file should save be saved in the directory /Internal Storage/pnp. And the
PNP URL should be point to the pnp directory. For instance, if a user wants to set his GXV3240 as a
HTTP file server, whose IP address is 192.168.1.100, and the config file is saved in the directory
/Local Storage/pnp, it needs to enter http://192.168.1.100/pnp If it needs to transport the file via
HTTPS, it needs to set the Access Method to HTTPS under the page of Maintenanceïƒ Web/SSH
To Next Page
Loading...
Need help?
General
