Figure 51: 4-way Conference Call Established
REMOVE PARTY FROM CONFERENCE
To remove a party from the conference, tap on the right top corner for the corresponding party. This
party will be disconnected from the conference.
END CONFERENCE
To end the conference, tap on to disconnect all the parties from the conference. GXV3240 will
hang up the call. If the remote party hangs up the call itself, it will be disconnected from the conference
but other parties on GXV3240 will stay in the existed conference.
HOLD AND RESUME CONFERENCE
During the conference, users could press the HOLD button to hold or resume the conference at
any time.
AUTO CONFERENCE MODE
The GXV3240 also supports "Auto Conference" which allows users to establish conference call in a quick
and easy way, instead of adding the other parties one by one. To enable Auto Conference feature, go to