Grandstream Networks GXV3240 User Manual

Firmware Version 1.0.3.30
GXV3240 User Guide
Page 56 of 177
Note:
 By default, the "No Key Entry Timeout" is 4 seconds, meaning if no key is pressed after starting
entering number, the call will be automatically sent out after the timeout. The timeout interval can be
configured under web GUI->Account->Call Settings.
 GXV3240 allows users to press # key as SEND key. This behavior can be disabled via option "Use #
as Dial Key" under web GUI->Account->Call Settings.
 When the user enters the digit on the dial screen, if there is digit matching call history, or contacts
name/number, the drop-down list will show the numbers. For example, if "John" is saved in the
contacts, entering 5 (JKL) 6 (MNO) 4 (GHI) 6 (MNO) will show call log with 5646 as the first four digits,
as well as John's number. Users could then directly select one of them from the list, instead of
entering all the digits.
REDIAL
Users can dial out the last dialed number if there is dialed call log, using the same SIP account making
the call last time. There are two ways to redial the last dialed number.
 When the phone is idle or off hook, press SEND button to redial.
 When the phone is on hook, press SEND button or # button (# key is used as dial key).
DIAL A NUMBER VIA CONTACT
Follow the steps below to dial a number via Contact.
1. Access Contacts by tapping on icon on the bottom of the idle screen, or selecting from
phone's menu.
2. Navigate in the contacts entries by sliding up/down on the screen.
3. Tap on the dial icon for the contact .

Grandstream Networks GXV3240 Specifications

General

Brand	Grandstream Networks
Model	GXV3240
Category	IP Phone
Language	English