GRAPHTEC FCX2000 - Main Specifications

FCX2000-UM-251-9370 1-3
1 INTRODUCTION
1.3 Main Specications
FCX2000-60VC FCX2000-120VC/ES FC2000-180VC
Conguration Flatbed
Drive system Digital servo
Media hold-down method VC models: Vacuum suction
ES models: Electrostatic adhesion
Effective cutting area 610 x 920 mm 1200 x 920 mm 1800 x 920 mm
Mountable media (Y-axis) 950 mm
Maximum cutting speed 400 mm/sec (Omnidirection)
Max. acceleration 5.88 m/s2 (Omnidirection)
Speciable speeds 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40 cm/s 16 steps
Max. force TOOL 1: Max. 4.9N (500gf) TOOL 2: Max. 9.8N (1Kgf)
Settable force TOOL 1: Set 40 steps TOOL 2: Set 40 steps
Min. character size About 10mm2 alphanumeric characters (depending on the materials and font)
Mechanical resolution 0.0025 mm
Programmable resolution GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL
TM
mode: 0.025 mm
Distance accuracy Distance moved within ±0.1% or less or within ±0.1 mm or less, whichever is larger (Plotter mode)
Perpendicularity 0.5mm/900 mm or less (Plotter mode)
Repeatability 0.1 mm or less: Expansion and contraction of the media are excluded (plotter/cutting mode)
Interfaces USB2.0 (full speed) , RS-232C, Ethernet 10BASE-T / 100BASE-TX
Buffer memory 2 MB
Command sets GP-GL and HP-GLTM emulation
Number of cutters/pens 2
Tool type VC models: Cutter Plunger, Water based ber-tip pen, Oil-based ballpoint pen, Creasing tool
ES models: Cutter Plunger, Water based ber-tip pen, Oil-based ballpoint pen, Creasing tool
MG models: Cutter Plunger, Water based ber-tip pen, Oil-based ballpoint pen
Compatible media VC models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 1 mm paper *2
• Thickness less than 0.8 mm compressed
foam sheet *4
• Thickness less than 1 mm sandblasting
rubber
• F, G flute *2
• Clear package sheet
• High-intensity reflective film *3
ES models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 1 mm paper *2
• Thickness less than 1 mm sandblasting
rubber
• F, G flute *2
• Clear package sheet *5
Ofine output function USB memory - 64 files
Bar code data management function
Yes
LCD display Graphic type (240 × 128 dot)
Usable roll paper Roll paper hanger
Usable roll paper width: 950 mm, weight: 5 kg
Power supply 100 to 240V AC 50/60Hz
Operating environment 10 to 35˚C, 35 to 75% RH (non-condensing)
Guaranteed precision operating
environment
16 to +32˚C, 35% to 70% RH (non-condensing)
External dimensions
(H x W x D)
1344 mm × 1409 mm × 930 mm
(Including media stocker)
193 4mm × 1409 mm × 93 0mm
(Includeding media stocker)
2534 mm × 1409 mm × 930 mm
(Includeding media stocker)
Weight (including stand) Approx. 76 kg VC model : Approx. 99kg
ES model : Approx. 95kg
Approx. 116 kg
*1 : HP-GL is a registered trademark of the US Hewlett Packard Company.
*2 : Use CB30UC-1 without warpage
*3 : Use cutter blade CB15UA
*4 : Use Cutter blade CB15U-K30
*5 : Cut material that can be fixed by electrostatic adhesion