GRAPHTEC FCX2000 - Adjusting The Play Of X Motor Drive Gear

FCX2000-UM-251-9370 8-51
8 DISASSEMBLY AND ASSEMBLY
8.4.6 Adjusting the Play of X Motor Drive Gear
Adjust the play of motor drive gear when the Motor Gear box was removed from the drive gear box.
(1) Loosen the three M4L8 Cap screws holding the X motor bracket after the X motor gear box was
installed.
X drive gear box
X motor gear box
M4L8 cap screw
X motor bracket
(2) Loosen the four M4L8 Cap screws holding the X motor gear box.
X motor gear box
M4L8 cap screw
(3) Tighten the four M4L8 Cap screws holding the X motor gar box while pushing to the blue arrow direction.
(4) And conrm the X motor gear box is installing vertically on the X drive gear box.
X motor gear box
M4L8 cap screw