GRAPHTEC FCX2000 - Cutter Plunger

FCX2000-UM-251-9370 3-3
3 Description of Parts
3.2 Cutter Plunger
This chapter describes the structures and types of the cutter plungers (cutter pens).
Cutter Plunger Nomenclature
There are three different plungers to suit the diameter of the cutter blade to be mounted (the φ1.5 mm cutter
plunger is provided as a standard accessory).
Blade-length adjustment knob
(For φ3.0 mm-diameter blades)
PHP34-CB30-HS
Cutter blade
Plunger
PHP35-CB09-HS/PHP35-CB15-HS
Plunger
Plunger-cap
Cutter blade
Blade-length adjustment knob
(Blue: For φ0.9 mm-diameter blades)
(Red: For φ1.5 mm-diameter blades)
Structure of Cutter Plunger
φ1.5 mm diameter cutter Plunger φ0.9 mm diameter cutter Plunger φ3.0 mm diameter cutter Plunger
Blade-length adjustment knob
Plunger
Chuck
(Red)
φ1.5 mm diameter cutter blade
Plunger-cap
Blade-length adjustment knob
Plunger
Chuck
(Blue)
φ0.9 mm diameter cutter blade
Blade-length adjustment knob
Plunger
Chuck
φ3.0 mm diameter cutter blade
Plunger-cap