FCX2000-UM-251-9370 8-21
8 DISASSEMBLY AND ASSEMBLY
8.2.4 Rear X Belt
How to detach the Rear X Belt
(1) Detach the right rear corner cover (Refer to the section 8.1.2.).
(2) Detach the left rear corner cover (Refer to the section 8.1.4.).
(3) Detach the rear top cover (Refer to the section 8.1.11.).
(4) Detach the rear bottom cover (Refer to the section 8.1.12.).
(5) Loosen the two M4L6 binding head screw xing the idler bracket.
Idler bracket
Rear X belt
M4L6 binding head screw
M4L6 binding head screw
Rear X belt
Idler bracket
Use this access hole to loosen the screw of front.
(6) Loosen the two belt tension adjustment screws to loosen the rear X belt tension.
Use these access holes to loosen the X belt tension.
(7) Remove the four M3L6 binding head screws holding the Rear X belt stoppers, and then detach the rear
X belt from the rear X slider.
M3L8 binding head screw
Belt stopper
Rear X belt
Use this hole to remove the rear of
M3L8 binding screws.
To Next Page
Loading...
