GRAPHTEC FCX2000 - Removing The Packing Material From The Main Unit

FCX2000-UM-251-9370 2-8
2 Setup procedure
2.4.2 Removing the packing material from the main unit
Don’t tilt the FCX2000 after the packing materials were removed.
Inside exible cables will be tangled and damaged when the Y bar or the pen Block are moved by tilting.
(1) Remove the packing materials which are xing the Y bar.
(2) Remove the packing materials which are xing the pen block.
(3) Remove the packing materials which are xing the tool holders.