FCX2000-UM-251-9370 9-7
9 ELECTRICAL ADJUSTMENTS
9.4 Explanation of the Values of the Main Board
Default factory settings
The default factory settings are recorded in the location shown below.
Explanation of the values
PEN FORCE
10g 48g 130g 210g 515g
PEN1 xx xx xx xx xxx
10g 48g 130g 210g 515g 1030g
PEN2 xx xx xx xx xxx xxx
DISTANCE ADJ
X x.xx HOME ADJ
Y x.xx X x.xx
XY xxx.x Y x.xx
REGISTRATION ADJ 1-2PEN ADJ
X x.xx X x.xx
Y x.xx Y x.xx
You can input the same values when you have replaced the main board without making any adjustments
except the registration sensor level adjustments.
If you have changed any values by making adjustments, record those values for the next maintenance check.
To Next Page
Loading...
