GRAPHTEC FCX2000 - Confirming The Conditions Of X Flexible Cable

FCX2000-UM-251-9370 2-9
2 Setup procedure
2.5 Conrming the conditions of X exible cable
Conrm the conditions of X exible cable before the power will be turned on if the FCX2000 was tilted.
The X exible cable will be damaged when the power was turned on if the X exible cable was tangled.
(1) Remove the four M4L8 binding head screws holding the rear top cover.
(2) Remove the three M3L6 binding head screws holding the front top cover at rear part for the FCX2000-
60, and then detach it.
Remove the four M3L6 binding head screws holding the front top cover at rear part for the FCX2000-
120, and then detach it.
Remove the ve M3L6 binding head screws holding the front top cover at rear part for the FCX2000-
180, and then detach it.
M4L8 binding head screw
M3L6 binding head screw
Rear top cover
(3) Conrm that the X exible cable is not tangled.
(4) Reinstall the rear top cover.