GRAPHTEC FCX2000 - Rear Bottom Cover

FCX2000-UM-251-9370 8-8
8 DISASSEMBLY AND ASSEMBLY
8.1.12 Rear Bottom Cover
How to detach the Rear Bottom Cover
(1) Detach the right rear corner cover (Refer to the section 8.1.2.).
(2) Detach the left rear corner cover (Refer to the section 8.1.4.).
(3) Detach the left top cover (Refer to the section 8.1.6.).
(4) Disconnect the X Flexible cable from the main board and release the X exible cable from the cable tie.
X Flexible cable
Cable tie
(5) Detach the rear top cover (Refer to the section 8.1.11.).
(6) Remove the seven M4L8 binding head screws holding the rear bottom cover for the FCX2000-60.
Remove the eight M4L8 binding head screws holding the rear bottom cover for the FCX2000-120.
Remove the nine M4L8 binding head screws holding the rear bottom cover for the FCX2000-180.
M4L8 binding head screw
M4L8 binding head screw M4L8 binding head screw
Rear bottom cover