GRAPHTEC FCX2000 - Attaching A Tool

FCX2000-UM-251-9730 4-14
4.
OPER ATIONS
4.5 Attaching a Tool
How to attaching
(1) Loosen the tool holder screw.
1
2
Bracket to hold tool
Tool holder
(2) While pushing up the tool holder, push the tool into the holder until its ange completely touches the
upper part of the holder.
1
2
Tool holder
Bracket to hold tool
Flange
(3) Make sure that the tool bracket is engaged on the tool's ange, and then tighten the screw.
!
"
Bracket to hold tool
Flange