GRAPHTEC FCX2000 - The X Or Y Motor Was Replaced; The X Or Y Belt Was Replaced

FCX2000-UM-251-9370 9-5
9 ELECTRICAL ADJUSTMENTS
9.2.7 The X or Y motor was replaced
When the X or Y motor was exchanged, an electric adjustment is executed by the following procedure.
End of Adjustment
9.12 Adjusting the Distance and the Perpendicularity Accuracy
9.2.8 The X or Y belt was replaced
When the X or Y belt was exchanged, an electric adjustment is executed by the following procedure.
9.10 Adjusting the Home Position
End of Adjustment
9.12 Adjusting the Distance and the Perpendicularity Accuracy