FCX2000-UM-251-9370 10-21
10 TROUBLESHOOTING
10.10 Self Diagnostic Test
Operation status can be tested by self diagnostic test by operating the sensors and switches following the
instruction on the screen.
Operation
(1) Turn on the power.
(2) Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
(3) Press the POSITION (
▲
) key (TEST).
TEST menu screen (1/2) is displayed.
(4) Press the POSITION (▲) key.
TEST menu screen (2/2) is displayed.
(5) Press the [2] key (DIAGNOSTICS).
DIAGNOSTICS start screen is displayed.
(6) Press the [1] key (DONE).
Message for testing is displayed on the screen.
To Next Page
Loading...
