GRAPHTEC FCX2000 - Installing The Warning Light Option Oph-A41

FCX2000-UM-251-9370 2-14
2 Setup procedure
2.7.2 Installing the Warning Light Option OPH-A41
This option of FCX2000 is not installing the bracket and Warning Light cables.
Therefore, this option needs to install the bracket and Warning Light cables before installing the Warning
Light Assembly.
Installing procedure
(1) Remove the three M4L8 binding head screws holding the left front corner cover, and then detach the left
front corner cover.
Left front corner cover
M4L8 binding head screw
(2) Remove the three M4L8 binding head screws holding the left rear corner cover, and then detach the left
rear corner cover.
Left rear corner cover
M4L8 binding head screw
(3) Remove the four M4L8 binding head screws holding the left top cover, and then detach the left top cover.
Left top cover
M4L8 binding head screw